Akai MPC User Manual page 300

Alternatively:
1. Use the Cursor Buttons to select the Seq field.
2. Press Window to open the Edit Current Sequence window.
3. Press F4 (Copy).
4. Use the Cursor Buttons to select the desired field and use the Data Dial or –/+ buttons to adjust
them.
•
Copy Contents of Sequence: Use this field to select the "source" Sequence.
•
Over Contents of Sequence: Use this field to select the "destination" Sequence.
5. Press F5 (Do It) to confirm your choice or F4 (Back) to cancel the operation.
(These functions on your MPC hardware have existed in earlier releases but were not described in the
earlier User Guide.)
The Edit Current Sequence window in the MPC hardware display.
300