In the upper-right corner of the
Grid View, there are some
menus and parameters you can
adjust:
•
Click the Track drop-down menu to select one of the Tracks to view in the grid.
•
Click and drag the Total Bars field up or down to change the selected Track's length. The default
setting is 2 bars. The maximum length is 999 bars.
•
Click the Time Correct drop-down menu to select the note value to quantize to. Default is 1/16
(16th notes).
•
Click and drag the Swing field up or down to set the amount of swing (from 50% to 75%) so you
can "shuffle" your beats—from subtle to extreme.
Hardware:
•
Press the Main button and use the Cursor Buttons to select the Trk field. Use the Data Dial or the
-/+ buttons to select the desired Track. You can also use the F3 (Track-) or F4 (Track+) buttons.
•
To change the number of bars, select the Bars parameter.
•
To adjust the Time Correct and Swing, press the F1 button (T.C.) and use the Cursor Buttons to
select the Note field or Swing field. Use the Data Dial or the -/+ buttons to set the desired value.
Press F5 (Do It) to confirm the operation or press F4 (Close) to cancel it without making any
changes.
80