Project Information - Akai MPC User Manual

•
To automatically place the sample as a note event at the start of the currently playing
Sequence, check At Start. (This option is available only when Add Event is checked.)
•
To automatically place the sample as a note event where you began recording it in the
currently playing Sequence, leave At Start unchecked. (This option is available only when Add
Event is checked.)
•
To delete the recording and start over, click Retry. To listen to the sample before deciding,
click Play. To save the sample, click Keep.
Hardware: When the recording is finished, the MPC hardware's display will show new options. Use the
Cursor Buttons to select a field, and use the Data Dial or -/+ buttons to change the setting:
•
Track: Select a Track to assign the sample to.
•
Assign to Pad: Select a pad to assign the sample to. Alternatively, simply press the pad.
•
Add Event: Set this to Yes to automatically add the sample to the currently playing Sequence. (This
option is available only when using Direct Record.)
•
At: Set this to Start to automatically place the sample as a note event at the start of the currently
playing Sequence. Set this to Trigger to automatically place the sample as a note event where you
began recording it in the currently playing Sequence (This field is available only when Add Event is
set to Yes.)
•
Root Note: Sets where the sample's original pitch will be on the keyboard.
To save the sample, press F5 (Keep). To delete the recording and try again, press F2 (Retry). To listen to
the sample before deciding, press F4 (Play).

Project Information

This is identical to the Project Information in Main Mode. For more information, please see
Project Information.
Important: Newly recorded samples will be shown in the Sample area of the Project Information. To
use them in your Project, load them into Programs first.
180
Main Mode >