Akai MPC User Manual page 335

Extract New Samples: New Program
Note: This is same as clicking the Convert To drop-down menu
and selecting New Program With New Samples.
This feature will create new samples from the current one and
assign them to pads in a new Program. The new Program will be
named after the sample and appended with ch. The new samples
will be appended with SI-# (where # is a consecutive number).
This is similar to applying the Convert process in v1.7 and
selecting Sliced Samples with Create New Program checked.
•
Crop Samples: Check this box to delete the unused parts from the samples when they're created
and assigned. This feature is destructive (though the Project will still contain your original sample).
Leave this box unchecked to keep the unused parts of the samples when they're created and
assigned. This is essentially like editing samples in Trim Mode and assigning them to pads, but this
method creates new samples, so you will still be able to further edit the entirety of each sample
even though you are using only part of it at the moment.
•
Create New Program: Check this box to create a new Program in which each slice results in a
sample and is automatically assigned to a pad. The new Program will be named after the sample
and appended with ch.
•
Create Events (available only if Create New Program is checked): Check this box to create a new
Program in which each slice results in a sample and is automatically assigned to a pad.
Furthermore, it will automatically create a new Track in which each pad plays its corresponding
slice in ascending sequence by pad number.
•
Number of Bars (available only if Create Events is checked): Click and drag this field up or down
to set how many bars the slices' events will occupy.
335