Akai MPC User Manual page 332

Hardware: New Program Using Slices will assign the current slice to a pad, similar to applying the
Convert process in v1.7 and selecting Sliced Samples with Create New Program selected. This option,
however, doesn't clutter your Project with lots of sample slices; each pad will simply refer to the slice in
this sample instead of creating a new sample.
•
Convert To: This will be set to New Program Using Slices. You can use this field to to select a
different conversion/assignment process.
•
Slice Type: Use this field to select how each pad's Layer section settings in Program Edit Mode will
be set when the slice is assigned to it (see this addendum's
learn more about how these settings work):
•
Non-Destructive Slice: Each pad's Slice setting will be set to the slice number.
•
Pad Parameters: Each pad's Slice setting will be set to Pad. The Pad Start and Pad End
parameters will be set to the slice's start point and end point values, and the Loop Pos parameter
will be set to the slice's start point but with Pad Loop deactivated.
•
Create Events: Set this to On to create a new Program in which each slice results in a sample and is
automatically assigned to a pad. Furthermore, it will automatically create a new Track in which each
pad plays its corresponding slice in ascending sequence by pad number.
•
Number of Bars (available only if Create Events is On): This field determines how many bars the
slices' events will occupy.
Press F5 (Do It) to confirm your choice or F4 (Cancel) or cancel the operation.
New Program Using Slices in the MPC hardware display.
Program Edit Mode > Layer Section
332
to