Master Effects
You can load, edit, or remove up to four Master effects.
To load a Master effect:
1.
In the software, click the Track Mixer tab in the Mode Tab Section.
2.
In one of the four slots of the Master FX column, click the downward arrow ().
3.
Select an effect from the menu that appears.
Hardware: To load and edit a Master effect:
1.
Press Shift + Seq Edit / Effects.
2.
Press F2 (Insert).
3.
Use the Cursor Buttons to select the desired Insert effect slot.
4.
Use the Data Dial or the -/+ buttons to open another page to select an effect.
Click F4 (Select) to load it, or click F3 (Back) to close the page.
236