Akai MPC User Manual page 295

Copy Bars: This lets you copy a range of bars from a Sequence
and add them to another at a specified point, which you can set
in the Copy Bars window that appears.
Click: Replace to overwrite the designated bars of the
destination Sequence; Merge to add the copied events to the
designated bars of the destination Sequence without erasing
anything; or Cancel to cancel the operation.
•
Copy Bars From:
Sequence: Click this drop-down menu and select the "source" Sequence.
o
First Bar / Last Bar: Click and drag these fields up or down to set the range of bars you want
o
to copy.
•
Copy Bars To:
Sequence: Click this drop-down menu and select the "destination" Sequence.
o
After Bar: Click and drag this field up or down to set the bar of the Sequence after which you
o
want to add the copied bars.
Copies: Click and drag this field up or down to select how many instances of the copied bars
o
you want to add.
Hardware: To copy a range of bars of a Sequence and add them to another at a specified point:
1. Press Seq Edit to open the Edit Sequence window.
2. Press Pad 03 (Copy Bars) to open the Copy Bars From window.
3. Use the Cursor Buttons to select the desired field and use the Data Dial or –/+ buttons to adjust
them.
The Copy Bars window in the MPC hardware display.
295