Akai MPC User Manual page 353

Pad Copy: User Guide v1.7 previously had a description of the Pad Copy button that was obsolete due
to subsequent software improvements. This has been corrected in MPC Hardware Overview >
MPC Renaissance > Top Panel (Page 19) and in MPC Hardware Overview > MPC Studio >
Top Panel (Page 28).
User Guide v1.7 also did not have a description of the Copy Pad window or function as shown in the
MPC hardware display:
The Copy Pad window in the MPC hardware display.
Hardware: To copy one pad (sample and parameters) to another:
1. Press Shift + Pad Assign / Pad Copy to open the Copy Pad window.
2. Use the Cursor Buttons to select the From Pad field. Press the "destination" pad.
3. Use the Cursor Buttons to select the To Pads field. Press select or deselect "destination" pads.
4. Press F5 (Do It) to confirm your choice or F4 (Close) to cancel the operation.
353