Akai MPC User Manual page 90

•
Velocity: The velocity of the note event with a velocity bar of corresponding color and length below
it.
•
Mod Type: The type of modifier used on the note event via automation. See the Mod description
on this page in Entering and Editing Events
•
Value: The value of the modifier automation. See the Value description on
and Editing Events
Hardware: In List View, the Sequence for the Track will be shown as a list of note events, with the
parameters listed above except for #. To set whether or not the list will scroll during playback, press
Window when any List View field is selected and use the Data Dial or -/+ buttons to select Off or Scroll.
To show or hide specific parameter columns, right-click one of the parameter names, and select the
parameter column to show or hide. You can also choose to Auto-size this column or Auto-size all
columns to fit the contents.
The red arrow () on the left side of the list represents the audio pointer's current position. If your
Sequence is playing, the arrow will move accordingly.
Click Show/Hide List to switch between the Grid View and List View. See the previous
View section for an explanation of this view.
Hardware: Press Shift + Step Seq to switch between the Grid View and List View.
Click Undo (the red arrow) to undo your last action.
Hardware: Press Undo to undo your last action.
Click Redo (the green arrow) to redo the last action you undid.
Hardware: Press Shift + Undo / Redo to undo your last action.
to learn more.
List View in the MPC hardware display.
to learn more.
90
this page in Entering
Grid