Akai MPC User Manual page 195

Hardware: Press F1 (Chop) to enter Chop Mode.
•
Use Q-Link Knobs Q13, Q9, Q5, or Q1 to adjust the start point of the sample. The smaller the Q-
Link Knob number, the more precise the adjustment of the start point.
•
Use Q-Link Knobs Q14, Q10, Q6, or Q2 to adjust the end point of the sample. The smaller the Q-
Link Knob number, the more precise the adjustment of the end point.
•
Use Q-Link Knob Q15 to select a slice for editing.
•
Use Q-Link Knob Q11 to set the threshold for slice detection (in Threshold Mode), the number of
regions (in Region Mode), or the number of bars (in BPM Mode).
•
Use Q-Link Knob Q8 to scroll through the waveform
•
Use Q-Link Knob Q7 to set the numbers of beats in BPM Mode. (This Q-Link Knob has no function
in Threshold Mode or Region Mode.)
•
Use Q-Link Knob Q4 to zoom in and out of the waveform
•
Use Q-Link Knob Q3 to set the Time Division in BPM Mode. (This Q-Link Knob has no function in
Threshold Mode or Region Mode.)
195