Suzuki GSX-R600 Manual page 308

1D-68 Engine Mechanical:
• Install the oil pump drive sprocket (2) to the
countershaft.
NOTE
Teeth "A" on the sprocket must face the
clutch side.
• Pass the chain (3) between the oil pump drive and
driven sprockets.
• Apply engine oil to the countershaft.
2
"A"
• Install the bearing (4) and spacer (5), and apply
engine oil to them.
5
Clutch
• Install the clutch component parts (1). Refer to "Clutch
Installation in Section 5C (Page 5C-7)".
3
"A"
I837H1140172-02
4
I837H1140173-02
1
I837H1140174-01
Starter Motor
• Install the starter motor (1). Refer to "Starter Motor
Removal and Installation in Section 1I (Page 1I-4)".
Crankcase Breather (PCV) Cover
• Install the gasket (1).
CAUTION
!
Use a new gasket to prevent oil leakage.
• Tighten the crankcase breather (PCV) cover bolts to
the specified torque.
Tightening torque
Crankcase breather cover bolt (a): 10 N·m (1.0
kgf-m, 7.0 lb-ft)
(a)
Engine Top Side
• Assemble the engine top side. Refer to "Engine Top
Side Disassembly (Page 1D-25)".
1
I837H1140175-01
1
I837H1140176-01
(a)
I837H1140177-02