Suzuki GSX-R600 Manual page 260

1D-20 Engine Mechanical:
11) Remove the oil cooler outlet hose (5).
12) Remove the muffler (6) and exhaust pipes (7) along
with the HO2 sensor. Refer to "Exhaust Pipe / Muffler
Removal and Installation in Section 1K (Page 1K-
11)".
6
13) Disconnect the horn coupler (8).
14) Remove the horn (9) and front engine cover (10).
8
9
15) Remove the radiator mounting bracket (11).
16) Disconnect the oil pressure switch lead wire (12).
11
5
I837H1140286-01
7
I837H1140248-01
10
I837H1140249-01
12
I837H1140250-02
17) Disconnect the GP switch lead wire coupler (13),
ground lead wire coupler (14) and CKP sensor lead
wire coupler (15).
15
18) Disconnect the ECT sensor lead wire coupler (16),
speed sensor lead wire coupler (17), starter motor
lead wire coupler (18) and crankcase breather (PCV)
hose (19).
17
16
19) Disconnect the ignition coil/plug cap lead wire
couplers (20), generator lead wire coupler (21) and
regulator/rectifier lead wire coupler (22).
CAUTION
!
Do not remove the ignition coil/plug cap
before disconnecting its coupler.
22
14
13
I837H1140251-01
18
19
I837H1140252-01
20
21
I837H1140253-01