Suzuki GSX-R600 Manual page 304

1D-64 Engine Mechanical:
Gear Position Switch
• Apply grease to the O-ring.
CAUTION
!
Replace the O-ring with a new one.
NOTE
Align the gear position switch pin "A" with
the gearshift cam hole "B".
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
"A"
• Apply thread lock to the gear position switch bolts and
tighten them to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Gear position switch mounting bolt (a): 6.5 N·m (
0.65 kgf-m, 4.7 lb-ft)
"B"
I837H1140154-01
(a)
I837H1140155-01
Water Pump
• Apply grease to new O-ring (1).
CAUTION
!
Use the new O-ring to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Tighten the water pump mounting bolts (2) to the
specified torque.
Tightening torque
Water pump mounting bolt (a): 10 N·m (1.0 kgf-
m, 7.0 lb-ft)
• Apply engine coolant to the O-ring.
CAUTION
!
Replace the O-ring with a new one.
1
I837H1140156-01
2
(a)
I837H1140157-01