Suzuki GSX-R600 Manual page 289

Starter Idle Gear / Generator Cover
1) Remove the starter idle gear component parts (1).
Refer to "Starter Clutch Removal and Installation in
Section 1I (Page 1I-10)".
2) Remove the generator cover (2).
3) Remove the dowel pin (3) and gasket (4).
4
3
4) Remove the starter idle gear No. 2 (5) and shaft (6).
6
1
I837H1140078-01
2
I837H1140280-01
I837H1140079-02
5
I837H1140080-01
Cam Chain / Cam Chain Tensioner / Cam Chain
Guide
1) While holding the generator rotor with the special
tool, remove the CKP sensor rotor/cam chain drive
sprocket bolt.
Special tool
(A): 09930–44520 (Rotor holder)
(A)
2) Remove the CKP sensor rotor/cam chain drive
sprocket (1) and cam chain (2).
3) Remove the cam chain tensioner (3) and cam chain
guide No. 1 (4).
3
1
Generator Rotor / Starter Driven Gear
Remove the generator rotor (1). Refer to "Generator
Removal and Installation in Section 1J (Page 1J-4)".
1
Engine Mechanical: 1D-49
I837H1140081-01
2
4
I837H1140082-01
I837H1140083-01