Suzuki GSX-R600 Manual page 292

1D-52 Engine Mechanical:
Transmission
Remove the transmission component. Refer to
"Transmission Removal in Section 5B (Page 5B-3)".
Crankshaft
1) Loosen the conrod cap bolts by using a 10 mm, 12-
point socket wrench, and tap the bearing cap bolts
lightly with a plastic hammer to remove the bearing
cap.
2) Remove the crankshaft (1) and thrust bearings (2).
1
I837H1140097-01
I837H1140098-01
I837H1140099-01
2
I837H1140100-01
Piston Cooling Oil Jet
Remove the piston cooling oil jets (1) from the upper
crankcase.
Piston / Conrod
1) Push the conrod to cylinder head side and remove
the piston and conrod from the upper crankcase.
CAUTION
!
Be careful not to damage the cylinder wall by
the conrod.
1
I837H1140101-01
I837H1140102-01
I837H1140103-01