1D-18 Engine Mechanical:
ISC Valve Reset
When removing or replacing the throttle body assembly,
reset the ISC valve learned value in the following
procedures:
1) Turn the ignition switch ON position.
2) Set up the SDS tools. (Refer to the SDS operation
manual for further details.)
3) Click "Active control".
4) Click "ISC learned value reset" (1).
5) Click "Reset" button (2) to clear the ISC learned
value.
Yes
B837H11406015
1
I837H1140298-01
2
No
I823H1140530-05
NOTE
The learned value of the ISC valve is set at
RESET position.
6) Close the SDS tool.
7) Turn the ignition switch OFF position.
NOTE
The ISC valve opening initialization is
automatically started after the ignition switch
is turned OFF.
TP Reset
When replacing the throttle body assembly or TP sensor
with a new one or reinstalling the TP sensor, reset the
TP learned value in the following procedures:
1) Turn the ignition switch ON.
2) Set up the SDS tool. (Refer to the SDS operation
manual for further details.)
3) Click the "Active control".
4) Click the "TP learned value reset" (1).
I823H1140531-03
B837H11406016
1
I837H1140305-01