Initializing Flash Memory; Resetting The Machine Settings - Oki MB441 User Manual

Initializing
Press to select [Management] and
5
then press .
OK
Press to select [SD Memory Card
6
Setup] and then press
Press to select [Format Partition]
7
and then press
Press to select the partition you want
8
to initialize and then press
A message appears confirming you that
continuing will automatically restart the system.
Select [Yes] to continue.

Initializing Flash Memory

Flash memory has saved mail templates, etc.,
stored on it.
Use the following steps to initialize.
Note
 When you initialize flash memory, the following data is
deleted:
- Custom demo data
- Font data
Press the <SETTING> key
1
Press to select [Admin Setup] and
2
then press .
OK
Enter the administrator password.
3
Select [Enter], and then press
4
Press to select [Management] and
5
then press .
OK
Press to select [Flash Memory
6
Setup] and then press
Check that [Initialize] is selected and
7
then press .
OK
Check that [Execute] is selected and
8
then press .
OK
A message appears confirming you that
continuing will automatically restart the system.
Select [Yes] to continue.
.
OK
.
OK
.
OK
.
OK
.
OK
Resetting the Machine
Settings
You can return the configured settings to their
default.
Note
 When you initialize the equipment settings, the following
data is deleted:
- Stored documents on the Fcode bulletin board
- Fax jobs that have not been sent
- Fax jobs received in the Fcode parent box.
- Registered job macros
- Dialing logs
- E-mail logs
Press the <SETTING> key.
1
Press
2
then press
Enter the administrator password.
3
Select [Enter], and then press
4
Press
5
then press
Press
6
then press
Check that [Execute] is selected and
7
then press
A message appears confirming you that
continuing will automatically restart the system.
Select [Yes]to continue.
- 174 -
to select [Admin Setup] and
.
OK
to select [Management] and
.
OK
to select [Reset Settings] and
.
OK
.
OK
.
OK