Oki MB441 User Manual page 100

List of the Device Setting Menu Items
 Management
Default Mode
Opera- Operation Timeout
tion
Clear
Clear After Job
Sound Key Touch Tone Volume
Control
FAX Buzzer Volume
Local- USB Menu
Inter-
*1
face
System Access Control
Setup
User Authentication Method
Unit of Measure
Date Format
Allow All Reports To Print
Near Life LED
Near Life Status
Address Information Lock Time Out
USB Memory Interface
Panel Contrast
Power Power Save Time
Save
Sleep Time
Auto Power Off Time
Item
Soft Reset
Speed
USB PS-Protocol
Offline Receive
Serial Number
Factory
Default
Copy Sets the default mode of the machine.
3 Sets time of automatic reset. Available
range: 1 to 10 minutes.
OFF Sets whether to reset after any job is
completed.
Middle Sets the volume of the key-touch tone.
Middle Sets the volume for transmission complete
acknowledgment.
Disable Sets whether to enable the soft reset
command.
480 Mbps Selects the maximum transfer speed of
USB interface.
RAW Selects a USB PS-protocol.
Disable Sets whether to receive data in offline
state or in recoverable error state.
Enable Sets whether to use a USB serial number.
Disable Sets access control.
Local Display condition: [Access Control] is set
to [User] or [Password].
millimeter Selects a displayed unit (millimeter / inch)
of measure.
dd/mm/yyyy
Disable Sets whether to allow printing reports with
personal information.
Enable Sets whether to light an LED when a near
life warning occurs.
Enable Sets whether a message is displayed when
a near life warning occurs.
3 minutes Sets time until a lock is released by the
machine when address book, telephone
book, or profile is kept locked by the utili-
ties. Available range: 1 to 10 minutes.
Enable When [Disable] is set. the scan to USB
and the print from USB memory functions
cannot be used.
0 Sets the LCD panel contrast. Available
range:
1 minute Sets time to enter the power save mode.
30 minutes Sets time to enter the sleep mode.
4 hours Sets time interval to turn off the
machine's power automatically.
- 100 -
Description
±
10 (1 increments).