Configuring The Wireless Lan From The Web Page (Mb451W/Mb471W Only); Ieee802.1X Settings - Oki MB441 User Manual

Configuring the wireless LAN from the Web Page

(MB451w/MB471w only)
This section explains how to set the wireless LAN settings change the network settings from the
machine's web page.
To access the machine's web page, your computer must meet the following conditions:
 TCP/IP is enabled.
 Microsoft Internet Explorer 6.0 or later, Safari 3.0 or later, or Firefox 3.0 or later is installed.
Memo
 Ensure that the security setting of the web browser is set to a middle level, or that cookies are allowed.
 To enter the [Admin Setup] menu, it is necessary to log in as the administrator. The factory default administrator password is
"aaaaaa".
Reference
 Some of the following settings can be performed on other utilities. For details, refer to
In order to configure from the Web, it is necessary to have completed the settings for wired or wireless
network connection.
Note
If WPA-EAP or WPA2-EAP is set for the security method, the settings from the [IEEE802.1x] menu need to be set beforehand.

IEEE802.1X settings

Access the machine's web page and log
1
in as the administrator.
The user name is "root", and the default password
is "aaaaaa".
Click the [IEEE802.1X] tab.
2
Using EAP-TLS:
a) Select [Disable] for [IEEE802.1X].
b) Select [EAP-TLS] for the [EAP Type].
c) Enter a user name in [EAP User].
d) Select [Do not use SSL/TLS Certificate
for EAP authentication] and then click
[Import].
e) Enter the file name of the certificate.
Only a PKCS#12 file can be imported.
f) Enter the password of the certificate and
then click [OK].
g) Select [Authenticate Server] and then
click [Import].
h) Enter the file name of the CA certificate
and then click [OK].
i) Specify the certificate issued by the
certificate authority, which is the
certificate authority from which the
RADIUS server obtained the certificate. A
PEM, DER, and PKCS#7 file can be
imported.
j) Click [Send].

Configuring the wireless LAN from the Web Page (MB451w/MB471w only)

k) When the main unit comes online, proceed
 When [WPA-EAP] or [WPA2-EAP] is set for the
Using PEAP:
a) Select [Disable] for [IEEE802.1X].
b) Select [PEAP] for the [EAP Type].
c) Enter a user name in [EAP User].
d) Enter the password in [EAP Password].
e) Select [Authenticate Server] and then
f) Enter the file name of the CA certificate
g) Specify the certificate issued by the
h) Click [Send].
i) When the main unit comes online, proceed
- 153 -
"Network Setting Items" P.
to "Wireless LAN settings".
Note
security method and [EAP-TLS] is selected as the
[EAP Type], [Not authenticate Server] cannot be
selected.
click [Import].
and then click [OK].
certificate authority, which is the
certificate authority from which the
RADIUS server obtained the certificate. A
PEM, DER, and PKCS#7 file can be
imported.
to "Wireless LAN settings".
133.
8