Faxing; Useful Operations For Transmission; Transmitting Duplex Documents (Duplexscan); Changing Where Documents Are Loaded - Oki MB441 User Manual

2. Faxing

This chapter explains your machine's useful fax functions and operations.

Useful Operations for Transmission


This section explains useful operations for fax transmission.
Memo
 To enter the [Admin Setup] menu, the administrator password is necessary. The default password is "aaaaaa".
Reference
 For details on how to specify a destination, refer to the User's Manual Basic.
 For details on how to load your documents in the ADF or on the document glass, refer to the User's Manual Basic.
Transmitting Duplex
Documents (DuplexScan)
You can transmit duplex documents by using the
ADF.
Note
 You cannot use the document glass for this procedure.
Place your document in the ADF.
1
Press the <FAX/HOOK> key.
2
Check that [Fax] is selected and then
3
press to open the fax start screen.
OK
Press the to select [Fax Functions]
4
and then press
OK
Press the to select [Duplex Scan]
5
and then press
OK
Press the to select a scanning method
6
and then press
OK
You can specify [Long edge bind] or [Short
edge bind].
Press the until the fax standby screen
7
appears.
Specify a destination.
8
Press to start transmission.
9
M
ONO
.
.
.
Changing Where Documents
Are Loaded
You can use both the ADF and the document
glass when scanning documents for a fax job.
This allows you to send both a document and a
part of a book as one fax.
Press the <FAX/HOOK> key.
1
Check that [Fax] is selected and then
2
press to open the fax start screen.
OK
Press the
3
and then press
Press the
4
Scan] and then press
Press the
5
press .
OK
Press the
6
appears.
Place your document with text face up in
7
the ADF or face down on the document
glass.
Specify a destination.
8
Press
9
M
ONO
When the [Start Scan] screen appears,
10
place the next document with text face
up in the ADF or face down on the
document glass.
Make sure [Start Scan] is selected and
11
then press
Repeat steps 10 and 11 as necessary for
12
each document you want to fax.
- 15 -
to select [Fax Functions]
.
OK
to select [Continuous
.
OK
to select [ON] and then
until the fax standby screen
.
.
OK
2