Wireless Lan Settings - Oki MB441 User Manual

Configuring the wireless LAN from the Web Page (MB451w/MB471w only)

Wireless LAN settings

Log in as the administrator.
1
Click the [Network Manager] tab.
2
Click the [Wireless LAN Settings]
3
menu.
In the [Basic Settings] field under
4
[Network Connection], select
[Wireless].
Memo
 The default is "Disabled".
Enter the SSID name of the wireless AP
5
that you want to connect to in [SSID].
Memo
 "default" is set as the default.
In the [Security method], select the
6
same security setting as the wireless AP
that you want to connect to.
Depending on the selected security
method, configure one of the settings
from (1) to (3) below.
When [Disable] is selected, press the
[Send] button at the bottom left of the
Web screen. (Not recommended for
security reasons.)
Memo
 The default is "Disable".
(1) When WEP is selected:
a) When [WEP] is selected, [WEP KEY] is
displayed.
Enter the same KEY as the WEP KEY set
for the wireless AP that you want to
connect to.
Note
 There is not setting for the WEP KEY index. The WEP
KEY index communications with the wireless AP as 1.
Memo
 After entering the KEY, the key is displayed as "*"
symbols for security reasons.
(2) When WPA-PSK or WPA2-PSK is
selected:
a) When [WPA-PSK] or [WPA2-PSK] is
selected, [Encryption type] and [Pre
Shared Key] are displayed.
b) In [Encryption type], select the
encryption type (TKIP or AES) set in the
wireless AP that you want to connect to.
Memo
 The default is "TKIP".
Depending on the model of wireless AP, the mixed
TKIP/AES may be supported. In this case, we
recommend using AES.
c) In [Pre Shared Key], enter the same KEY
as the Pre Shared KEY set for the wireless
AP that you want to connect to.
Memo
 After entering the KEY, the key is displayed as "*"
symbols for security reasons.
- 154 -