Initializing Flash Memory - Oki C822n User Manual

Initializing
Formatting a Particular Partition
You can initialize a particular partition within the
SD memory card's 3 partitions (two "Common"
partitions and "PCL" partition).
Note
● When you initialize a partition, the following data is
deleted.
- Common: Job data and demo data stored with
[Secure Print], [Encrypted Secure Print] or
[Store to SD Card].
- PCL: Form data in the PCL area
1
Press the <ENTER> button.
2
Press to select [Admin Setup] and
then press the <ENTER> button.
3
Enter the administrator password using
the ten-key pad.
The default password is "aaaaaa".
4
Press the <ENTER> button.
6
5
Press to select [SD Card Setup] and
then press the <ENTER> button.
6
Press to select [Format Partition]
and then press the <ENTER> button.
7
Press to select the partition you
want to initialize and then press the
<ENTER> button.
A message appears notifying you that continuing
will automatically restart the system. Select
[Yes] to continue.

Initializing Flash Memory

Flash memory stores data such as form data,
etc.
Use the following steps to initialize.
Note
● When you initialize flash memory, the following data is
deleted.
- Custom demo data
- Form data
1
Press the <ENTER> button
2
Press to select [Admin Setup] and
then press the <ENTER> button.
3
Enter the administrator password using
the ten-key pad.
The default password is "aaaaaa".
4
Press the <ENTER> button.
5
Press to select [Flash Memory
Setup] and then press the <ENTER>
button.
6
Make sure that [Initialize] is selected
and then press the <ENTER> button.
7
Make sure that [Execute] is selected
and then press the <ENTER> button.
A message appears notifying you that continuing
will automatically restart the system. Select
[Yes] to continue.
- 118 -