Table of Contents
Advertisement
installation
|
16
The Top Facing Support, the Side Nailing Strips, the 2 Top Standoffs and the Flue Collar must be correctly positioned and attached before the fireplace
is moved into position.
Top Facing Support
is reversed
for "C" hole position
The top standoffs are shipped in a flat position and must be folded into shape and
attached.
1) Take each standoff and bend into the correct shape. Bend up at the bend lines
until the screw holes in the standoff and the pre-punched slots on the fireplace
top line up. Be sure to use correct slots, they are marked.
3) Attach the standoff securely to the top with 2 screws per standoff (on opposite
corners).
Top Facing Support
is reversed
for "C" hole position
Determine the total thickness of facing material (e.g. drywall or wood plus ceramic tiles) to
allow the finished surface to be flush with the front of the unit. Total facing thickness can vary
from 1/2" (13mm) to 1-1/4" (32mm) thick.
Top Facing
Support
The Top Facing Support can be mounted in
3 different positions depending on the
thickness of the facing material.
1) Mount Top Facing Support using the 3 supplied screws into the three pre-punched
screw holes on the top front of the unit. Use hole positions A, B, or C depending on your
facing depth.
Top Facing
Support
Top Facing Support
Side
is reversed
Nailing
for "C" hole position
Strip
16 |
Regency Bellavista™ B36XTE-10 Gas Fireplace
Side
Top Facing Support
UNIT ASSEMBLY PRIOR TO INSTALLATION
Screw holes for
Top Facing
BEFORE YOU START
Support
TOP STANDOFF ASSEMBLY
Top Facing Support
C
B
Screw holes for
A
Top Facing
Support
Top Facing Support
for "C" hole position
TOP FACING SUPPORT
C
B
A
Screw
Position
A
B
C*
Top Facing Support
* For "C" screw position the top facing
for "C" hole position
support is reversed.
Top Facing Support
Screw holes for
Top Facing
Support
Top Facing Support
Screw holes for
Top Facing
Support
"C" Screw Position:
For a facing material depth of 1-1/4" (32mm),
the top facing support must be reversed.
Top Facing Support
Screw holes for
Top Facing
C
Support
B
A
Top Facing Support
is reversed
C
B
A
C
B
Screw holes
A
for Side
Nailing Strip
Nail4.eps
C
B
A
C
B
Screw holes
A
for Side
Nailing Strip
is reversed
C
B
Facing Material
Nail4.eps
A
Depth
C
B
A
1/2" / 13mm
7/8" / 22mm
1-1/4" / 32mm
is reversed
Nail5.eps
C
B
A
C
B
A
C
B
A
Nail5.eps
C
B
A
C
B
Screw holes
Nail6.eps
A
for Side
Nailing Strip
C
B
A
Nail4.eps
SIDE NAILING STRIPS
The side nailing strips come attached to the unit.
There are 2 plates, one on the top and bottom
that can be folded out as required.
Advertisement
Table of Contents
