Table of Contents
Advertisement
IMPORTANT FINISHING DETAIL NOTE:
Before placing unit into final position - it is important to know the total
thickness / height of finished hearth (tile, carpet, etc.) The base of the
fireplace should be level or higher than the finished hearth height.
Note:
All non-combustible facing material should butt up cleanly
to the flanges around the firebox opening.
Rough edges will be visible from the front view with the flush
louvers or flush panels - if not using the optional finishing trim.
To maintain a clean finished edge - it is recommended to
install the non-combustible facing material with the finished
edge against the fireplace / nailing strips.
Alternatively, you can use J Style Trim or Metal Corner Bead
to cover cut edges of the non-combustible facing material.
Non-combustible
Material
J-style Trim
or metal corner bead
may be used to finish these
edges
Diagram 3
Shown with optional finishing trim
Diagram 1
Diagram 2
1
40
2 "
FINISHING
Important:
Finishing materials such as tile, river rock, etc, must not protrude
beyond the front facing flanges the sides and top of the firebox opening.
installation
Regency Bellavista™ B36XTE-10 Gas Fireplace
|
15
|
15
Advertisement
Table of Contents
