Table of Contents
Advertisement
17) Reinstall the logs.
18) Reinstall mesh guard and glass door.
19) Plug the light assembly into the receptacle located on the
bottom left side of the unit.
Ground Wire
20) Turn on electrical supply - test lights.
918-821a
Receptacle
LINE VOLTAGE WIRING TO RECEPTACLE IN UNIT
TO MAKE OUTLETS INDEPENDENT OF EACH OTHER
ELECTRICAL WORK MUST BE
PERFORMED BY A QUALIFIED
ELECTRICIAN
BULB REPLACEMENT
1) Follow steps 1- 4 from previous page.
2) Remove 2 screws to remove light diffuser plus gasket.
3) Replace the bulb - do not touch bulb with bare hands, use gloves or bulb
packaging to protect bulb.
4) Reinstall the gasket and light diffuser.
5) Reverse steps 4-1.
Regency Bellavista™ B36XTE-10 Gas Fireplace
3
installation
AC Adaptor
08/13/14
|
51
|
51
Advertisement
Table of Contents
