27.1 Overview
Remote management allows you to determine which services/protocols can access which
AMG1302-T11C interface (if any) from which computers.
The following figure shows remote management of the AMG1302-T11C coming in from the WAN.
Figure 119 Remote Management From the WAN
Note: When you configure remote management to allow management from the WAN, you
still need to configure a IP filter rule to allow access.
You may manage your AMG1302-T11C from a remote location via:
• Internet (WAN only)
• LAN only
• LAN and WAN
• None (Disable)
To disable remote management of a service, select Disable in the corresponding Service Access
field.
27.1.1 What You Can Do in the Remote Management Screens
• Use the Remote MGMT screen
interface(s), which services can access the AMG1302-T11C.
• Your AMG1302-T11C can act as an SNMP agent, which allows a manager station to manage and
monitor the AMG1302-T11C through the network. Use the SNMP screen
212) to change your SNMP settings.
LAN
(Section 27.2 on page
AMG1302-T11C User's Guide
C
HAPTER
Remote Management
WAN
HTTP
Telnet
211) to configure through which
210
2 7
(Section 27.3 on page