Scheduling Rule Add/Edit; The Advanced Screen - ZyXEL Communications AMG1302-T11C User Manual

Table 27 Network Setting > Wireless > Scheduling
LABEL
Modify
Apply
Cancel

7.8.1 Scheduling Rule Add/Edit

Use this screen to set the times your wireless LAN is turned off. To open this screen, click the Add
New Rule button or an existing rule's Edit icon in the Network Setting > Wireless >
Scheduling screen.
Figure 39 Network Setting > Wireless > Scheduling: Add New Rule/Edit
The following table describes the fields in this screen.
Table 28 Network Setting > Wireless > Scheduling: Add New Rule/Edit
LABEL
Rule Name
Day
Time of Day Range
OK
Cancel

7.9 The Advanced Screen

Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Advanced, the screen appears as shown.
See Section 7.10.2 on page 107
Chapter 7 Wireless LAN
DESCRIPTION
Click Edit to configure the rule.
Clcik Delete to remove the rule.
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
Enter a descriptive name for identification purposes. You can enter up to 15
alphanumeric characters. Spaces are not allowed, but dashes "-"and underscores "_"
are accepted.
Check which day(s) of the week you want to turn the wireless LAN off.
Specify a time frame during which the schedule would apply.
For example, if you set the time range from 12:00 to 23:00, the wireless LAN will be
turned off only during this time period.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
for detailed definitions of the terms listed in this screen.
AMG1302-T11C User's Guide
103