The Qos Game List Screen - ZyXEL Communications AMG1302-T11C User Manual

Table 46 QoS > Class Setup Add/Edit (continued)
LABEL
Type Of
Service Mark
DSCP
Mark(0~63)
802.1Q Tag
OK
Cancel

10.5 The QoS Game List Screen

Use this screen to give priority to traffic for specific games. Click Network Setting > QoS > Game
List to open the screen as shown next.
Figure 67 Network Setting > QoS > Game List
Chapter 10 Quality of Service (QoS)
DESCRIPTION
Select a type of service to re-assign the priority level to matched traffic.
Available options are: Normal service, Minimize delay, Maximize throughput,
Maximize reliability and Minimize monetary cost.
This field is available only when you select IP in the Ether Type field.
If you select Mark, enter a DSCP value with which the AMG1302-T11C replaces the DSCP
field in the packets.
If you select Unchange, the AMG1302-T11C keep the DSCP field in the packets.
If you select Remark, select a priority level (in the Ethernet Priority field) and enter a
VLAN ID number (in the VLAN ID field) with which the AMG1302-T11C replaces the IEEE
802.1p priority field and VLAN ID of the frames.
If you select Remove, the AMG1302-T11C deletes the VLAN ID of the frames before
forwarding them out.
If you select Add, the AMG1302-T11C treat all matched traffic untagged and add a
second priority level and VLAN ID that you specify in the Ethernet Priority and VLAN
ID fields.
If you select Same, the AMG1302-T11C keep the Ethernet Priority and VLAN ID in the
packets.
To configure the Ethernet Priority, you can either select a priority number in the first
drop-down list box (7 is the highest and 0 is the lowest priority) or select an application
from the second drop-down list box which automatically maps to the corresponding
priority number. (Key Net Traffic: 7; Voice: 6; Video: 5;IGMP: 4; Key Data: 3)
Click OK to save your changes.
Click Cancel to exit this screen without saving.
AMG1302-T11C User's Guide
145