ZyXEL Communications AMG1302-T11C User Manual page 65

Chapter 5 Connection Status and System Info Screens
LABEL DESCRIPTION
DHCPv6 This field displays the status of the DHCPv6.
Radvd State This field displays whether RADVD (Router Advertisement Daemon) is enabled to have
the AMG1302-T11C send IPv6 prefix information in router advertisements periodically
and in response to router solicitations.
IPv6 LAN DNS1/ This is the first/second DNS server IPv6 address the AMG1302-T11C passes to the DHCP
2
clients.
WLAN Information
Status This displays whether wireless LAN is turned on or off.
SSID This is the descriptive name used to identify the AMG1302-T11C in the wireless LAN.
Channel This is the channel number used by the AMG1302-T11C now.
Security Mode This displays the type of security the AMG1302-T11C is using in the wireless LAN.
WPS Configured displays when the WPS security settings have been configured and wireless
clients can connect with the device through WPS. Unconfigured displays when the
device has not been configured and wireless clients can't establish a link with the device
through WPS.
Scheduling This displays whether WLAN scheduling is activated.
WiFi MAC This is the MAC (Media Access Control) of the WiFi interface.
Security
Firewall
This displays whether or not the AMG1302-T11C's firewall is activated. Click this to go to
the screen where you can change it.
Interface Status
Interface This column displays each interface the AMG1302-T11C has.
Status This field indicates whether or not the AMG1302-T11C is using the interface.
For the DSL interface, this field displays Down (line is down), Up (line is up or
connected), Initializing (line is initializing), Establishing Link (line is establishing a
link) if you're using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping a
call) if you're using PPPoE encapsulation.
For the LAN interface, this field displays Up when the AMG1302-T11C is connected
through an Ethernet cable to a computer or a HUB. It displays Down when the
AMG1302-T11C's Ethernet port is disconnected.
For the WLAN interface, it displays Active when WLAN is enabled or InActive when
WLAN is disabled.
Rate For the LAN interface, this displays the port speed.
For the WAN interface, this displays the DSL link rate downstream and upstream.
For the DSL interface, it displays the downstream and upstream transmission rate.
For the WLAN interface, it displays the maximum transmission rate when WLAN is
enabled or N/A when WLAN is disabled.
System Status
DSL Up Time This field displays how long the DSL connection has been active.
System Up Time This field displays how long the AMG1302-T11C has been running since it last started
up. The AMG1302-T11C starts up when you plug it in, when you restart it
(Maintenance > Reboot), or when you reset it (see
Current Time This field displays the current date and time in the AMG1302-T11C. You can change this
in Maintenance > Time Setting.
System Resource
AMG1302-T11C User's Guide
65
Chapter 1 on page 16).