Ipv6 Static Route Edit - ZyXEL Communications AMG1302-T11C User Manual

The following table describes the labels in this screen.
Table 40 Network Setting > Static Route > IPv6 Static Route
LABEL
Add new static
route
#
Destination IP
Prefix Length
Gateway
Device
Modify

9.3.1 IPv6 Static Route Edit

Use this screen to configure the required information for an IPv6 static route. Click Add new static
route or select an IPv6 static route index number and click Edit. The screen shown next appears.
Figure 60 Network Setting > Static Route > IPv6 Static Route: Add/Edit
The following table describes the labels in this screen.
Table 41 Network Setting > Static Route > IPv6 Static Route: Add/Edit
LABEL
Destination IPv6
Address
IPv6 Prefix Length Enter the address prefix to specify how many most significant bits compose the network
Chapter 9 Static Route
DESCRIPTION
Click this to configure a new IPv6 static route.
This is the number of an individual static route.
This parameter specifies the IP network address of the final destination. Routing is always
based on network number.
An IPv6 prefix length specifies how many most significant bits (starting from the left) in
the address compose the network address. This field displays the bit number of the IPv6
subnet mask.
This is the IPv6 address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward packets to
their destinations.
This specifies the LAN or WAN PVC.
Click the Edit icon to go to the screen where you can set up a static route on the
AMG1302-T11C.
Click the Remove icon to remove a static route from the AMG1302-T11C. A window
displays asking you to confirm that you want to delete the route.
DESCRIPTION
This parameter specifies the IP network address of the final destination. Routing is always
based on network number. If you need to specify a route to a single host, use a prefix
length of 128 in the prefix length field to force the network number to be identical to the
host ID.
address.
AMG1302-T11C User's Guide
135