ZyXEL Communications AMG1302-T11C User Manual page 164

The following table describes the labels in this screen.
Table 60 Security > Filter
LABEL
Rule Type
Rule Type selection
MAC Filter Rule Editing
MAC Filter Rule Index
Active
Source MAC Address
MAC Filter Listing
MAC Filter Rule Index
#
Active
Mac Address
Apply
Delete
Cancel
Chapter 14 Filters
DESCRIPTION
Select White List to specify traffic to allow and Black List to specify traffic to
disallow.
Select the index number of the filter rule.
Use this field to enable or disable the filter rule.
Enter the MAC addresses of the clients that are allowed access to the AMG1302-
T11C. Enter the MAC addresses in a valid MAC address format, that is, six
hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Select the index number of the filter set from the drop-down list box.
This is the index number of the rule in a filter set.
This field shows whether the rule is activated.
This is the MAC address of the packets being filtered.
Click this to apply your changes.
Click this to remove the filter rule.
Click this to restore your previously saved settings.
AMG1302-T11C User's Guide
164