ZyXEL Communications AMG1302-T11C User Manual page 183

Table 70 Parental Control: Add/Edit (continued)
LABEL DESCRIPTION
Parental Control Enter a descriptive name for the rule.
Profile Name
Home Network User Select the LAN user that you want to apply this rule to from the drop-down list box. If
you select Custom, enter the LAN user's MAC address. If you select All, the rule
applies to all LAN users.
Internet Access Schedule
Day Select check boxes for the days that you want the AMG1302-T11C to perform parental
control.
Time of Day to Apply
Start Time Enter the starting and ending time that the LAN user is allowed access.
End Time
Network Service
Network Service If you select Block, the AMG1302-T11C prohibits the users from viewing the Web sites
Setting with the URLs listed below.
If you select Access, the AMG1302-T11C blocks access to all URLs except ones listed
below.
Add new service Click this to show a screen in which you can add a new service rule. You can configure
the Service Name, Protocol, and Name of the new rule.
Active This shows whether a configured service is activated or not.
Service Name This shows the name of the rule.
Protocol This shows the protocol of the rule.
Port This shows the port of the rule.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to remove an existing rule.
Blocked Site/URL Enter the URL of web sites or URL keywords to which the AMG1302-T11C blocks
access.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Chapter 16 Parental Control
AMG1302-T11C User's Guide
183