Quality Of Service (Qos) Screen; Wps Screen - ZyXEL Communications EMG6765-Q10A User Manual

Table 25 Network > Wireless LAN 2.4G/5G > Advanced (continued)
LABEL
Apply
Cancel

9.7 Quality of Service (QoS) Screen

The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click Network > Wireless LAN 2.4G/5G > QoS. The following screen appears.
Figure 42 Network > Wireless LAN 2.4G/5G > QoS
The following table describes the labels in this screen.
Table 26 Network > Wireless LAN 2.4G/5G > QoS
LABEL
WMM QoS
Apply
Cancel

9.8 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN 2.4G/5G > WPS.
Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on
the EMG6765-Q10A.
Chapter 9 Wireless LAN
DESCRIPTION
Click Apply to save your changes back to the EMG6765-Q10A.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select Enable to have the EMG6765-Q10A automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes them
run more smoothly.
Note: This field is not configurable and the EMG6765-Q10A automatically
enables WMM QoS if you select 802.11n, 802.11an, 802.11gn or 802.11bgn
in the Wireless LAN 24G/5G > General screen.
Click Apply to save your changes to the EMG6765-Q10A.
Click Cancel to reload the previous configuration for this screen.
EMG6765-Q10A User's Guide
87