Resetting The Usg - ZyXEL Communications ZyWall USG20-VPN User Manual

The commands in my configuration file or shell script are not working properly.
• In a configuration file or shell script, use "#" or "!" as the first character of a command line to
have the USG treat the line as a comment.
• Your configuration files or shell scripts can use "exit" or a command line consisting of a single "!"
to have the USG exit sub command mode.
• Include write commands in your scripts. Otherwise the changes will be lost when the USG
restarts. You could use multiple write commands in a long script.
Note: "exit" or "!'" must follow sub commands if it is to make the USG exit sub command
mode.
See Chapter 32 on page 605
I cannot get the firmware uploaded using the commands.
The Web Configurator is the recommended method for uploading firmware. You only need to use
the command line interface if you need to recover the firmware. See the CLI Reference Guide for
how to determine if you need to recover the firmware and how to recover it.
My packet capture captured less than I wanted or failed.
The packet capture screen's File Size sets a maximum size limit for the total combined size of all
the capture files on the USG, including any existing capture files and any new capture files you
generate. If you have existing capture files you may need to set this size larger or delete existing
capture files.
The USG stops the capture and generates the capture file when either the capture files reach the
File Size or the time period specified in the Duration field expires.
My earlier packet capture files are missing.
New capture files overwrite existing files of the same name. Change the File Suffix field's setting
to avoid this.

36.1 Resetting the USG

If you cannot access the USG by any method, try restarting it by turning the power off and then on
again. If you still cannot access the USG by any method or you forget the administrator
Chapter 36 Troubleshooting
for more on configuration files and shell scripts.
USG20(W)-VPN Series User's Guide
645