Changing The System Password; Resetting The Prestige; Figure 2-7 Menu 23 - System Password - ZyXEL Communications Prestige 316 User Manual

Broadband sharing gateway / wireless lan
Hide thumbs Also See for Prestige 316:
Table of Contents

Advertisement

24
System Maintenance
26
Schedule Setup
99
Exit
2.7

Changing the System Password

The first thing your should do before anything else is to change the default system password by following
the steps outlined next.
Step 1.
Enter 23 in the main menu to open Menu 23 – System Password as shown next.
Step 2.
Enter your existing password and press [Enter].
Step 3.
Enter your new system password and press [Enter].
Step 4.
Re-type your new system password for confirmation and press [Enter].
Note that as you type a password, the screen displays an (X) for each character you type.

2.7.1 Resetting the Prestige

If you have forgotten your password or for some reason cannot access the SMT menu you will need to
reinstall the configuration (rom) file. Uploading the configuration file replaces the current configuration file
with the default configuration file, you will lose all configurations that you had before and the speed of the
console port will be reset to the default of 9600bps with 8 data bit, no parity and 1 stop bit (8n1). The
password will be reset to the default of 1234, also.
Turn off the Prestige and begin a Terminal session with the current console port settings. Turn on the
Prestige again. When you see the message "Press Any key to enter Debug Mode within 3 seconds", press
any key to enter debug mode. You should already have downloaded the correct file from your nearest
ZyXEL FTP site. See Chapter 10 for more information on how to transfer the configuration file to your
Prestige.
Hardware Installation and Initial Setup
This menu provides system status, diagnostics, firmware upload, etc.
This menu allows the Prestige to manage a remote node and dictate when
a remote node should be called and for how long.
To exit from SMT and return to the blank screen.
Menu 23 - System Password
Old Password= ?
New Password= ?
Retype to confirm= ?
Press ENTER to Confirm or ESC to Cancel:
Figure 2-7
Menu 23 – System Password
Prestige 316 Broadband Sharing Gateway / Wireless LAN
2-9

Advertisement

Table of Contents
loading

Table of Contents