Detected Device - ZyXEL Communications ZyWall USG20-VPN User Manual

Table 48 Monitor > Wireless > Station List
LABEL
Signal Strength
Channel
Band
IP Address
Tx Rate
Rx Rate
Tx
Rx
Association Time
Refresh

6.14.4 Detected Device

Use this screen to view information about wireless devices detected by the AP. Click Monitor >
Wireless > Detected Device to access this screen.
Note: At least one radio of the APs connected to the USG must be set to monitor mode (in
the Configuration > Wireless > AP Management screen) in order to detect
other wireless devices in its vicinity.
Figure 103 Monitor > Wireless > Detected Device
The following table describes the labels in this screen.
Table 49 Monitor > Wireless > Detected Device
LABEL
#
Status
Device
MAC Address
SSID Name
Channel ID
802.11 Mode
Chapter 6 Monitor
DESCRIPTION
This field displays the signal strength of the station. The signal strength mainly depends
on the antenna output power and the distance between the station and the AP.
This indicates the number the channel used by the station to connect to the network.
This indicates the frequency band which is currently being used by the station.
This field displays the IP address of the station. An 169.x.x.x IP address is a private IP
address that means the station didn't get the IP address from a DHCP server.
This field displays the transmit data rate of the station.
This field displays the receive data rate of the station.
This field displays the number of packets transmitted from the station.
This field displays the number of packets received by the station.
This field displays the time duration the station was online and offline.
Click this to refresh the items displayed on this page.
DESCRIPTION
This is the station's index number in this list.
This indicates the detected device's status.
This indicates the detected device's network type (such as infrastructure or ad-hoc).
This indicates the detected device's MAC address.
This indicates the detected device's SSID.
This indicates the detected device's channel ID.
This indicates the 802.11 mode (a/b/g/n/ac) transmitted by the detected device.
USG20(W)-VPN Series User's Guide
122