ZyXEL Communications ZyWall USG20-VPN User Manual page 494

To access this screen, log in to the Web Configurator, and click Configuration > Object > Service
> Service. Click a column's heading cell to sort the table entries by that column's criteria. Click the
heading cell again to reverse the sort order.
Figure 332 Configuration > Object > Service > Service
The following table describes the labels in this screen.
Table 203 Configuration > Object > Service > Service
LABEL
Add
Edit
Remove
Object
References
#
Name
Content
Reference
29.6.2.1 The Service Add/Edit Screen
The Service Add/Edit screen allows you to create a new service or edit an existing one. To access
this screen, go to the Service screen (see
icon or an Edit icon.
Figure 333 Configuration > Object > Service > Service > Edit
Chapter 29 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The USG confirms you want to remove it
before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific service.
This field displays the name of each service.
This field displays a description of each service.
This displays the number of times an object reference is used in a profile.
USG20(W)-VPN Series User's Guide
Section 29.6.2 on page
494
493), and click either the Add