ZyXEL Communications ZyWall USG20-VPN User Manual page 415

Figure 287 Configuration > BWM > Create New Object > Add Address
The following table describes the fields in the above screen.
Table 162 Configuration > BWM > Create New Object > Add Address
LABEL
Name
Address Type
IP Address
OK
Cancel
Chapter 26 BWM (Bandwidth Management)
DESCRIPTION
Enter a name for the Address object of the rule.
Select an Address Type from the drop down menu on the right. The Address
Types are Host, Range, Subnet, Interface IP, Interface Subnet, and Interface
Gateway.
Enter an IP address for the Address object.
Click OK to save the setting.
Click Cancel to abandon the setting.
USG20(W)-VPN Series User's Guide
415