Page Switch For Incoming Calls; Manually Forwarding An Incoming Call - Mitel 6915 User Manual

Receiving calls
Note:
The audio path setting you selected in the Settings > Audio > Audio Path menu determines if the call
goes to the speakerphone or headset. For more information, see the section
Note:
If the MiVoice Business System has determined that the call is encrypted end-to-end, a secure call
icon appears in the status bar on the Home screen.
7.2

Page switch for incoming calls

If you have programmed many line appearances (pages) on the phone and have scrolled to another page
and a call comes in on one of the line appearances you cannot see the caller without scrolling back to the
main page.
However, if your system administrator has enabled the "Auto Pagination" COS option in MiVB, the phone
automatically switches to the first page that hosts the ringing line (incoming call). When multiple ringing
lines are active on different pages, each page will be selected and displayed, in sequence, for a short
duration. The phone will continue selecting and displaying the page of the active ringing line until the
device is idle, after which the home page is presented.
7.3

Manually forwarding an incoming call

If call forwarding numbers have been defined for the Always or No Answer states, press the Forward
Call softkey to manually forward an incoming call to the defined number.
A common way of using this feature is to configure call forwarding to forward calls to your voicemail
service. You can then can manually decide whether to answer an incoming call or send the call to
voicemail.
49
"Audio Path".
User Guide