13.
Bobbin winder
06.12
Requirement
1. When the winder is switched on, the bobbin winder spindle should move securely with
the winder.
2. When the winder is switched off, friction wheel 5 must not engage drive wheel 1.
3. The bobbin winder should switch off automatically when the bobbin has been filled to
approx. 1 mm from the edge.
Fig. 13 - 14
Move drive wheel 1 (screws 2) according to requirements 1 and 2.
Move pin 3 (screw 4) according to requirement 3.
5
2
1
4
Adjustment
3
13 - 15