Table of Contents
Advertisement
2- STEPPING MOTOR X-AXIS
Via the plus/minus keys, the motor can be moved forward or backward.
or
3- STEPPING MOTOR Y-AXIS
or
Via the plus/minus keys, the motor can be moved forward or backward.
4- THREAD TRIMMING SEQUENCE
By pressing the Enter key, a thread trimming sequence is carried out.
5 - DISPLAY INPUTS
6 - SET / RESET OUTPUTS
7 - SET NEUTRAL POINT
(See chapter 8.04 Checking/setting zero point).
8 - SOFTWARE DATE
The clearance under the needle must not blocked!
The clearance under the needle must not blocked!
The clearance under the needle must not blocked!
Programming
11 - 8
Advertisement
Table of Contents
