Table of Contents
Advertisement
Stitch width
Superimposes a zigzag stitch on a basic line.
Circle
Input of a circular seam.
Circular arc
Input of a seam with the shape of a circular arc.
Curve end
Transformation of a curve supporting point to a curve end point.
Quick motion
Start sewing
Trim thread
Loading position program end
Machine function menu
F2
When the function is active, a menu with further functions is available.
Speed
Input of the speed from 200 min
Additional tension
Switches on second thread tension for certain seam sections.
Foot level
Presser foot is switched to second height.
1st clamp
Open/ close clamp.
2nd clamp
Open/ close clamp.
Output
Freely programmable outputs can be set/ reset.
Programmed stop
Input of a machine stop at a particular seam pattern position without thread trimming and
opening of clamps. A new start is initiated via the program start key or the foot switch.
Sewing off
Input of sewing interruption in the program sequence without thread trimming.
Waiting for input
This function causes the machine to wait until an input (switch, proximity switch) has
reached a certain level before the program is executed.
Waiting period
Input of a waiting period at a particular position of the seam section. After the waiting
period is over, the program is automatically continued.
Delay parameters
To activate programmed functions at a particular position in the seam section, these can
be delayed.
-1
to max. permissible speed.
Programming
11 - 12
Advertisement
Table of Contents
