Table of Contents
Advertisement
Preparation
9
Winding the bobbin thread, adjusting the bobbin thread tension
.02
If the bobbin 1 is not filled evenly:
9 - 2
3
2
Fig. 9 - 02
Place an empty bobbin 1 onto bobbin winder spindle 2.
Thread the bobbin in accordance with Fig. 9-02 and wind it counter-clockwise around
bobbin 1 a few times.
Switch on the bobbin winder pressing bobbin winder spindle 2 and lever 3.
The bobbin fills up while you are sewing.
The thread tension on bobbin 1 can be adjusted with knurled screw 4.
The bobbin winder stops automatically when bobbin 1 is full.
Loosen nut 5.
Turn thread guide 6 correspondingly.
Tighten nut 5.
4
-
1
+
6
5
Advertisement
Table of Contents
