Table of Contents
Advertisement
Programming
2- SEAM PATTERN PROGRAMMING
Sewing programs can be programed directly on the machine (see chapter 11.04.06 Seam
pattern programming).
3- SEAM PATTERN CORRECT
Sewing programs can be corrected directly on the machine. (See chapter 11.04.07
Correcting sewing program).
4- COUNTERS
With this main function, the user can program counters in the subfunctions according to his
or
requirements.
Values are always changed via the plus/minus keys or the number keys.
11 - 5
6- FORMAT DISC (DELETE)
Discs can be reformatted (720 KB).
If the disc is reformatted, all of the data on the disc are deleted.
7- DATA TRANSFER WITH PC
Via this function, the control is made ready to transmit in order to communicate directly
with a PC via the SYS 3000 software.
1- BOBBIN PRESELECT
The number of stitches can be selected according to which the machine automatically
stops for a bobbin change.
2- BOBBIN STITCH COUNTER
The current value of the specified stitch count until the bobbin is changed is displayed.
The value can be reset using the Clear key.
3- THREAD MONITOR DELAY
The number of stitches can be set for which a thread disturbance is to be ignored.
A small number of stitches means that the needle thread monitor is more sensitive.
4- BOBBIN MONITOR DELAY
The number of stitches can be set for which a thread disturbance is to be ignored.
A small number of stitches means that the bobbin monitor is more sensitive.
5- PRESELECT NO. OF BACK-ST.
The number of stitches can be set by which, when there is a thread disturbance, the
needle automatically goes back.
6- SLOW STARTING STITCHES
The number of stitches can be set which are to be carried out when sewing is begun
with reduced speed.
Advertisement
Table of Contents
