Table of Contents
Advertisement
13
Needle in the needle hole center
.06.04
Requirement
The needle should penetrate right into the center of the needle hole.
Fig. 13 - 06
Position the needle immediately above the needle hole.
Loosen screws 1, 2 and 3 (behind screw 4).
Move needle bar frame 5 according to the requirement.
Slightly tighten screw 2. Retighten screw 3.
Using screw 1, pull the inner guide pin up to the eye of needle bar frame 5 and screw it
tight.
Rotate the handwheel a few times to prevent needle bar frame 5 tensioning.
Retighten screw 2.
2
4
3
Adjustment
6
3
4
1
5
5
1
13 - 7
Advertisement
Table of Contents
