Table of Contents
Advertisement
Controls
7
Functions in the INPUT mode
.03.04
The following functions can be selected by pressing the corresponding green key.
Program station A
When the function is activated (diode lit), a previously stored program is called.
Program station B
When the function is activated (diode lit), a previously stored program is called.
Program selection
When the function is activated (diode lit), a previously stored program can be selected via
the number keys or the plus/minus keys.
Stitch length change
When the function is activated (diode lit), the value for the stitch length can be changed via
the number keys or the plus/minus keys. The value entered must be confirmed with the
Enter key.
Reset unit counter
The unit counter is reset to "0".
Enter key
For confirming input values and dialogs (entry into functions).
Clear key
For resetting input values.
Esc key
For interrupting functions without assuming input values which may have been changed
(return to previous menu level).
Plus key
This key is used for
- increasing the input values in increments
- answering dialog questions with "yes" and
- for paging up in the menu mode.
Minus key
This key is used for
- for decreasing the input values in increments
- answering dialog questions with "no" and
- for paging down in the menu mode.
Number keys
This key is used for
- entering number values and
- direct selection of menu functions.
7 - 4
Advertisement
Table of Contents
