Table of Contents
Advertisement
Press program end key.
CREATE STITCH DATA WITH " + "
Press plus key.
STITCH GENERATION IN PROGRESS
PROGRAMMING DISPLAY SWITCHED OFF
The completed sewing program is now in the machine memory with its assigned program
number.
11
Correcting sewing program
.04.07
Connect programming panel to unit (see chapter 8.01.03 Connecting disk drive and/or
programming panel).
Turn on main switch (see chapter 7.01 On/off switch).
Move feed carriage manually to zero point (right rear end position).
Press home position key on control panel.
Select the SEWING PROGRAM CORRECT function with number key 3.
Display in programming panel:
PROGRAM TO CORRECT:
or
Select desired program number (or use number keys of control panel).
Confirm program number selection.
Enter
PROGRAM NUMBER AFTER CORRECTION:
or
Enter new program number for the program to be changed.
32 : QUICK MOTION
An existing sewing program can be carried out either from the zero point or
from the loading point.
If a new program number is not entered, the original program is deleted
following the correction.
Programming
11 - 20
Advertisement
Table of Contents
