Table of Contents
Advertisement
Programming
6- TIMES
or
Under this main function, times are listed which can be set via the plus/minus keys or the
number keys.
7- SERVICE
The service functions are only intended for the mechanics. A detailed description is found in
the service manual for the machine control.
11 - 7
3- LANGUAGES
Several languages are listed here from which the desired user language can be selected.
1- GERMAN
2- ENGLISH
3- FRENCH
4- SPANISH
5- ITALIAN
4- OTHER FUNCTIONS
Under this subfunction are other subfunctions which can be turned on or off with the
number keys 1 or 0.
1- AUTOM. OPENING OF CLAMPS
After program completion, the sewing jig is automatically released.
2- AUTOMATIC PROGRAM CHANGE
After program completion, the program station is automatically changed.
3- FOOT SWITCH MODE
4- OBSTACLES
This function must be entered when the program is created if parts of the sewing
jig are higher than the presser foot of the machine.
5- CARRIAGE MOVEMENT
When this function is on, the carriage moves continuously during sewing.
When this function is off, the carriage moves intermittently, e.g. when the needle
is in the material the carriage feed stops.
1- TIME FOR NEEDLE COOLING
The airblast time for cooling the needle can be set as required.
2- TIME FOR THREAD PULLER
The time is to be set so that the thread puller cylinder can carry out the complete stroke.
1- SEWING MOTOR
The sewing motor can be switched on/off via the program start/stop key in order to
control the speed. The speed can be varied via the keys increase/decrease speed
setting.
Advertisement
Table of Contents
