Table of Contents
Advertisement
Programming
F1
or
CIRCLE
Enter
ENTER CIRCLE SUPPORTING POINT 1
Enter
ENTER CIRCLE SUPPORTING POINT 2
Enter
MOVE TO LAST POINT WITH ENTER
Enter
11 - 19
Activate start sewing function
33 : START SEWING
Activate graphics menu function.
Press plus/minus keys until the CIRCLE function appears in the display.
Press Enter key.
To create the circle, two additional supporting points must be marked.
Move to first supporting point (see Fig. 11-03).
Press Enter key.
Move to second supporting point (see Fig. 11-03).
Press Enter key.
36 : CIRCLE END POINT
Press Enter key.
36 : CIRCLE END POINT
Select thread trimming function.
37 : TRIMMING
Advertisement
Table of Contents
