Table of Contents
Advertisement
13
Adjustment
13
Notes on adjustment
.01
All the adjustments described in this manual refer to a completely installed machine and
may be carried out only by appropriately trained personnel.
The machine covers which must be unscrewed and replaced for checks and adjustment
work are not mentioned in the text.
The screws and nuts in parentheses ( ) secure those machine parts which must be loosened
before adjustment and retightened after adjustment.
13
Tools, gauges and other accessories
.02
1 set of screwdrivers from 2 to 10 mm blade width
1 set of wrenches with jaw widths from 7 to 14 mm
1 set of Allan keys from 1.5 to 6 mm
1 metal ruler, part no. 08-880 218-00
1 adjustment pin (5 mm in diameter), part no. 13-033 341-05
Thread and test material
13
Abbreviations
.03
TDC = top dead center
BDC = bottom dead center
Adjustment
13 - 1
Advertisement
Table of Contents
